Serving the San Jose area  ·  (669) 274-4795  ·  Open Mon-Sun 7am-7pm
📞 (669) 274-4795 Free Quote

Metal Roofing in Fremont, CA (94538) · Local Professionals

San Jose Metal Roofing · Fast response in Fremont and the San Jose area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+285Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fremont's 94538 ZIP code runs from the flat, sunny tracts of Sundale and Blacow to the older, tree-lined blocks near Irvington and the warm hillside lots up toward Mission Peak. Most of these homes went up between the 1950s and 1980s, with low-pitch and gabled roofs that have spent decades baking under strong East Bay sun. When the original composition or tile starts to fail, metal is the upgrade that finally makes sense here.

We're San Jose Metal Roofing, and Fremont homeowners call us because we know the difference between a simple ranch re-roof near Lake Elizabeth and a steep, access-tight replacement off Niles Canyon Road.

Metal Roofing in Fremont (94538)

Fremont sits between the bay and the Diablo Range, and that geography drives the work. In the flats around Sundale and Blacow, you get single-story stucco and wood-sided ranches on standard lots, which means straightforward access but roofs that take full afternoon sun and bake their original underlayment. Up in the Mission San Jose hills and the older Niles district, lots get tighter, grades get steeper, and tree debris from oaks and redwoods collects in valleys and behind chimneys. We size crews and staging for that reality, not for a showroom brochure. The other big local factor is the housing mix: a lot of 1950s and 1960s tract homes still have their second or third layer of composition shingles, and when we do a metal roof over shingles retrofit, we check the deck and the existing layers against what the local building department will allow. Standing seam and stone-coated steel are popular here because they handle UV and the occasional atmospheric-river downpour without the maintenance cycle of shake or tile.

Our team has worked Fremont roofs for years, from the Centerville district to the Warm Springs side, and we bring that pattern recognition to every estimate.

Our services in Fremont

How a Job Works in Fremont

Step 1: You call (669) 274-4795 or request a free estimate. We schedule an on-site assessment, walk the roof and attic if accessible, check flashings, fasteners, and decking, and talk through options: repair, replacement, or a retrofit over existing shingles. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the permit with the City of Fremont building department and coordinate any HOA design review if your neighborhood has one. On the job, our crew protects landscaping and windows, stages materials where access allows, and keeps you posted on progress. Steep hillside lots and tight driveways near Niles get extra planning for delivery and fall protection.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We leave your property clean and show you exactly what was done, including photos of the deck and flashing details.

Pricing in Fremont depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over shingles from $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Coating and painting start at $2.50 per square foot, and gutters run from $9 per linear foot. Steep hillside access, multiple existing layers, or urgent storm damage can move the number, so we always confirm with a free on-site estimate. Call (669) 274-4795 to schedule yours.

My 1960s ranch near Sundale has two layers of old composition shingles. Can you install metal over them?
Sometimes, yes. Local code limits how many existing layers can stay, and we check the deck condition and layer count before recommending a retrofit. If the deck is sound and the layers are within the limit, a metal roof over shingles can save you tear-off cost. If not, we'll explain why a full tear-off is the safer call.
A storm just peeled back panels on my roof in Fremont. How fast can you respond?
We prioritize active leaks and wind damage. Call (669) 274-4795, and we'll schedule an inspection as soon as possible, often same or next day depending on volume. We document the damage for your insurance claim and can make temporary repairs to stop water intrusion while you wait for a full fix.
What does a typical metal roof replacement cost for a 1,500 square foot Fremont home?
For a simple single-story ranch, replacement often lands in the range of $9 to $14 per square foot installed, so a 1,500 square foot roof might run roughly $13,500 to $21,000 depending on panel type, pitch, and tear-off. Steep hillside lots or complex rooflines push it higher. We give a firm written estimate after seeing the roof.
Do I need a permit from the City of Fremont for a metal roof replacement?
In most cases, yes. A full re-roof or replacement typically requires a permit, and the thresholds and inspection requirements are set by the City of Fremont building department. We handle the permit application and inspections as part of the job, and we always defer to the city's current rules, which can change.
My HOA requires design approval. Can you help with that, and what about the property line with my neighbor?
We can provide panel profiles, colors, and specification sheets for your HOA submittal, and we'll coordinate scheduling around their review. On property lines, we keep work within your roof footprint and follow local setback rules. If a neighbor's tree overhangs or debris is an issue, we'll flag it early so you can sort it out before work begins.
Are you fully insured for work on my Fremont property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew.
What maintenance should I do on a metal roof in Fremont between rainy seasons?
Clear leaves and debris from valleys, gutters, and behind chimneys, especially if you have oaks or redwoods nearby. Check fasteners and sealant at flashings once a year, and rinse off dust and pollen buildup. Fall is the right time, before atmospheric-river storms arrive. We offer inspections and tune-ups if you'd rather have a pro handle it.
Why choose us?

Trusted professionals in San Jose

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Jose

All your work handled by qualified professionals in San Jose

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

285+ Verified Client Reviews in San Jose

⭐⭐⭐⭐⭐ 4.9/5 · 285 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Jose · Response within 24h · No commitment · ☎ (669) 274-4795

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Jose ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm